Satelco® CWT5010 3G/4G RTU SMS Alarm-Gateway

Easy setup with any terminal

Satelco® CWT5010 3G/4G RTU Alarm-Gateway is designe as cost effective remote control system alert device. It monitors up to 4 dry contacts an 4 drivable relay outputs. User-defined SMS is sent to pre-configure mobile phone numbers when a predefined alarm condition happens. These pre-configured mobile phone numbers can belong to technicians or engineers who are responsible in handling corresponding alarms. With the aid of this RTU, the alarm condition brings attention to in-charge personnel immediately. Besides it allows those mobile phone users to trigger any relay output by using SMS. The output can be connected with alarm indication device, such as alarm and others.
There is a built-in microprocessor chip running on a realtime operating system. It gives immediate response to any change in both inputs and outputs condition. A GSM modem is embedded in the RTU, the user needs a SIM card (not included) to put the RTU into operation. The RTU can be installed in any location under 3G/4G coverage.

- Integrated supporting battery
- Emulator software
- Flexible messages, recipients and options setting
- Time stamped alarm messages
- No need to use a PC – Easy for external application
- Dedicated standalone operation
- 2 watchdog inside, 24x7 operation
- Low operating cost
- 10 SMS alarm recipient (responsible person group)
- Bidirectional data transmission
- 4 controllable replay outputs (12 – 24 V)
- 4 protected universal digital inputs. Accepts dry contact or voltage input up to 5 V
- Built-in temperatur sensor (optional)
- Battery inside
- Alarm buzzer (optional)
- Remote setting of telephones, remote enquiry of telephone group, input and output status
- Phone groups and remote control via remote control add, edit, delete, Pulse device
- Configuration of all input and output messages
- Eeasy to configure graphical interface application software

DOWNLOAD Data sheet - Satelco Article number  3G-10381 4G-11367

DOWNLOAD Usermanual