KNX Thermostat 1 IN / 1 OUT
The In-wall Room Thermostat is an EIB / KNX device for controlling temperature applications in Home and Building Automation, and is characterized by the possibility of being mounted on in-wall boxes of 2 or 3 modules, rectangular or round. It is available in a range of colours for plastic housing; glass finishes can be ordered separately, which allows you to match the thermostat to all types of environments.
The thermostat has large LCD for displaying the current temperature or set point, fan speed, summer/winter mode and the 4 operating status. The unit is equipped with one binary input (potential free contact) that can be used for a window sensor or other devices, and one binary output relay to control the speed 1 of the fan coil or even a zone valve. The thermostat can also be configured for used in combination with an ON/OFF output module to control the three fan coil speeds. Control elements available to the user include two buttons for increasing or decreasing the set point temperature (current setting) and two buttons for increasing or decreasing the fan speed or stopping the fan all together.
KNX In-wall Room Temperature Unit 1 IN / 1 OUT
The In-wall Room Temperature Unit is an EIB / KNX device for temperature controlling applications in Home & Building Automation. It can be fitted in rectangular or round embedded boxes with 2 or 3 modules. The plastic housing is available in a range of different colours and glass finishes can be ordered separately, allowing you to match the temperature unit with any type of design.
A large LCD display on the temperature unit displays the current temperature a set point, fan speeds, heating mode / cooling mode, window and CO2 status. The device has a physical clean contact input and an output relay for general use. Control elements available to the user are two buttons to increase and decrease the set point temperature, a button for adjusting the fan coil fan speed and a button for manually changing the status (comfort, standby). By pressing first two buttons simultaneously, you can change settings related to the CO2 parameter as well. By pressing the 3rd and 4th button simultaneously the device sends a 1-bit command.
• Private houses, etc.