In-wall Module 3 IN / 2 OUT

Module includes:

  • 2 digital inputs
  • 1 analog input
  • 2 relay output (bistable)

Digital inputs are intended to be connected to free potential contacts and can interface sensors, traditional buttons, etc.; they can be used to on/off commands, dimming, shutter control, scene recall and control, sequences of 3 objects.

Analog input, can manage one temperature probe (with On/Off threshold) or one thermostats to control heating and cooling equipments, valves, 2 and 4 pipes fan coil etc..

Analog input, alternatively to the temperature sensor, can manage a Infrared Receiver (IRX) in order to forward to the bus up to 8 channel coming from a Infrared Remote Control (IRC) with On/Off commands, scenes, sequences of 2 objects, dimmer and shutter.

Outputs include switching function with timed delays, stair-case function, scene recall, lock or logic function.


3 out Dimmer 1-10 V

Dimmer used to control lighting circuits via a 1/10 V connection, acting upon remote control dimmers or electronic ballasts. Device is intended to be installed on DIN rail.


3x 300W Dimmer Modul

The 3 channel Dimmer Module is designed to drive dimmerable lighting with KNX bus and allow dimming of incandescent and halogen loads of 230V, BT and TBT. The product can control one (900W), two (600+300W) or three (3x 300W) independent lighting circuits. Devise is intended to be installed on DIN rail.


Inwall 8 Input - 4 LED Output

This KNX module includes 4 digital inputs to interface free pontential contacts; 4 analog / 4 digital inputs for free potential contacts or temperature sensors and 4 led outputs. Digital inputs can interface sensors, traditional buttons etc.; 4 low voltage/current output channels to drive LED signal indicator lamps. Inputs 5 to 8, set as analog inputs, enable up to 2 temperature probes (with On/Off threshold) an 2 thermostats to control heating an cooling equipments, valves, 2 and 4 pipes fan coils.


Push Button Interface - 2 IN – 2 OUT LED / 4 IN – 4 OUT LED

The product is dedicated to interface of clean contacts with 2 or 4 input channels, such as sensors, traditional buttons and 2 or 4 low voltage/current output channels to drive LED signal indicator lamps.


UNIVERSAL MODULE 12 OUT

The device is a Din Rail 12 output 16 A actuator and can be used to:

  • Control up to 12 independent loads / lights
  • Control up to 6 independent blind / roller shutters with mechanical end position
  • Device is intended to be installed on DIN rail.


Universal module 8 OUT

The DIN RAIL 8 Output Module is an EIB/KNX DIN rail mounting device useful to Interface loads (e.g. lamps) for any kind of applications.
Device 8 outputs on board can be configured:

  • Each output can be configured independently for load control (R1 to R8)
  • Each output can be configured independently for ON / OFF or continuous switching (PWM) for Electric valves (solenoid actuators) (EV1 to EV8)
  • Outputs can be configured in pairs for the management of roller shutters and blinds; up to 4 channels (Channels A to D)
  • Outputs can be configured in pairs for management of Motor Reductor or for solenoid valves with 3-point control or for ventilating grille; up to 4 channels (Channels A to D)
  • Fan Coil Actuator for 2/4 pipes systems for Heating / Cooling with 3 speed motors) (uses relay from 1 to 5)
  • Device is intended to be installed on DIN rail.


Universal module 4 OUT

The DIN RAIL 4 Output Module is an EIB/KNX DIN rail mounting device useful to interface loads (e.g. lamps) for any kind of applications.
Device 4 outputs on board can be configured:

  • Each output can be configured independently for load control (R1 to R4)
  • Each output can be configured independently for ON / OFF or continuous switching (PWM) for Electric valves (solenoid actuators) (EV1 to EV4)
  • Outputs can be configured in pairs for the management of roller shutters and blinds; up to 2 channels (Channels A to B)
  • Outputs can be configured in pairs for management of Motor Reductor or for solenoid valves with 3-point control or for ventilating grille; up to 2 channels (Channels A to B)


Universal module 4 IN / 4 OUT - C-Load

The DIN RAIL Module is an EIB/KNX DIN rail mounting device useful to interface commands (e.g. push buttons) or loads (e.g. lamps) for any kind of applications.
The device is equipped with 4 binary inputs (clean contacts) and 4 relay outputs suitable for capacitive loads. Inputs can be configured to conventional switching devices, e.g. push buttons, switches, floating contacts, for switching functions with pulse edge evaluation (e.g. rising or falling edge, toggle, etc. …). Inputs can be configured as output channels to drive LED synoptic monitoring panels. Inputs can be used as switch, dimming, shutter control, scenarios; outputs include switching function, scenarios, logic functions.
Outputs can act as interlocked channels; this function may be used to drive fan coils with 2-pipes / 3 speeds of 4-pipes / 2 speeds. Devices are intended to be installed on DIN rail.


Universal Module 8 IN / 8 Out - C-Load

The DIN RAIL Module is an EIB/KNX DIN rail mounting device useful to interface commands (e.g. push buttons) or loads (e.g. lamps) for any kind of applications.
The device is equipped with 8 binary inputs (potential free) and 8 relay outputs. Inputs can be connected to conventional switching devices, e.g. push buttons, switches, floating contacts, for switching functions with pulse edge evaluation (e.g. rising or falling edge, toggle, etc. …). Inputs can be configured with ETS, as output channels to drive LEDs in synoptic monitoring panels. Inputs can be used to for switch, dimming, shutter control, scenarios; outputs include switching function, scenarios, logic functions.
Relay from 5 to 8 are equipped with manual command and can be switched manually.
Device is intended to be installed on DIN rail.


Universal module 4 Input / 4 Output

The DIN RAIL 4 Input / 4 Output Module IO44E01KNX is an EIB/KNX DIN rail mounting device useful to interface commands (e.g. push buttons) or loads (e.g.
lamps) for any kind of applications. The device is equipped with 4 binary inputs (potential free) and 4 binary relay outputs. Inputs can be connected to conventional switching devices, e.g. push buttons, switches, floating contacts,
for switching functions with pulse edge evaluation (e.g. rising or falling edge, toggle...). Inputs can be configured with ETS SW, as output to drive Leds.
Inputs can be used to for on/off commands, dimming, shutter control, scene recall and control; outputs include switching function, scene recall and control logic
function.

Device 4 outputs on board can be configured:

  • Each output can be configured independently for load control (R1 to R4)

  • Each output can be configured independently for ON / OFF or continuous switching (PWM) for Electric valves (solenoid actuators) (EV1 to EV4)

  • Outputs can be configured in pairs for the management of roller shutters and blinds; up to 2 channels (Channels A to B)

  • Outputs can be configured in pairs for Management of Motor Reductor or for solenoid valves with 3-point control or for ventilating grille; up to 2 channels
    (Channels A to B)


Universal module 8 IN / 8 OUT

The DIN RAIL 8 Input / 8 Output Module IO88E01KNX is an EIB/KNX DIN rail mounting device useful to interface commands (e.g. push buttons) or loads (e.g. lamps) for any kind of applications. The device is equipped with 8 binary inputs (potential free) and 8 binary relay outputs. Inputs can be connected to conventional switching devices, e.g. push buttons, switches, floating contacts, for switching functions with pulse edge evaluation (e.g. rising or falling edge, toggle...). Inputs can be configured with ETS SW, as output to drive Leds. Inputs can be used to for on/off commands, dimming, shutter control, scene recall and control; outputs include switching function, scene recall and control logic function.

Device 8 outputs on board can be configured:

  • Each output can be configured independently for load control (R1 to R8)
  • Each output can be configured independently for ON / OFF or continuous switching (PWM) for Electric valves (solenoid actuators) (EV1 to EV8)
  • Outputs can be configured in pairs for the management of roller shutters and blinds; up to 4 channels (Channels A to D)
  • Outputs can be configured in pairs for management of Motor Reductor or for solenoid valves with 3-point control or for ventilating grille; up to 4 channels (Channels A to D)
  • Fan Coil Actuator for 2/4 pipes systems for Heating / Cooling with 3 speed motors) (uses relay from 1 to 5)