IR Teach-in device GC-IRL
IR code reader, integrated in a 9-pole sub D plug, for use on an RS-232 interface. The IR teach-in device is used with a computer to learn the total range of IR codes which control the IR devices.

DOWNLOAD Accessories Data sheet

IR Converter GC-IRE
Converts IR signals into digital data that can then be read from any computer or serial RS-232 interface. The IR converter is compatible with the IR receiver (GC-RG1) and the converter cable (GC-CXG).

IR Receiver GC-RG1
The IR receiver records and digitises IR signals and passes this information on to the IR converter GC-IRE.

Video Sync sensor GC-SV1
The Video Sensor has a high-impedance sensor input for video signals and monitors the On/Off status. The 1.90 m cable is equipped with a 3.5 mm jack, which can be connected directly to an FBAS output. The sensor gets the required supply voltage of 5 V from the IR network adapter GC-100.

Voltage sensor GC-SP1
The voltage sensor monitors the On/Off status of the electronic components by recording an AC/DC voltage of between ± 2V and up to ± 24 V. The voltage sensor can be connected directly to the network adapter GC-100, which connects the sensor with the network. The 1.90 m cable is equipped with a 3.5 mm jack for connecting. The sensor gets the required supply voltage of 5 V from the IR network adapter GC-100.

Contact sensor GC-SC1
The contact sensor detects the open and closed state of connected floating relays or switches. The voltage sensor can be connected directly to the network adapter GC-100, which connects the sensor to the network. The 1.90 m cable is equipped with a 3.5 mm jack for connecting. The sensor gets the required supply voltage of 5 V from the IR network adapter GC-100.